(Closed) Request For Proposal – GPSNR-RFP-A02-021-Comprehensive Disease Fighting Approach

Share This Post

Deadline for submission has been updated to 8th July 2022

Note: awarding of the contract will be subject to securing of full funding

1. Introduction

The Global Platform for Sustainable Naural Rubber is an international, multi-stakeholder, voluntary membership initiative committed to improving the socioeconomics and environmental performance of the natural rubber value chain.  Development of the GPSNR was intiated by the CEOs of the World Business Council for Sustainable Development (WBCSD) Tire Industry Project (TIP) in 2018.  Members of the platform include tire manufacturers, rubber suppliers and processors, vehicle makers and NGOs.  Representatives from each of these stakeholder groups have contributed to the development of the Singapore-based platform and the wide-reaching set of priorities that will define strategy and objectives.

The GPSNR aims to support the natural rubber sector to become more sustainable. Key element in achieving  this is to ensure there is capacity among smallholders and industrial plantations to adopt best practices in NR  production.

GPSNR, through the GPSNR Capacity Building Working Group (Indonesia National Subgroup), is seeking to engage service providers to implement the following aspects of disease fighting for natural rubber trees in Indonesia:

  1. On-site inspection for diseases across multiple regions
  2. Pilot rapid response mechanism for disease fighting
  3. Develop and distribute materials on disease fighting
  4. Coaching smallholders on disease treatment and prevention

Proposed programmes should be implemented in line with GPSNR environmental and social commitments and values, based on the GPSNR Policy Framework1.


1https://gpsnr.dev.zippisite.com/policy-framework/

2. Objectives and Scope of Work     

There are approximately 2.25M smallholders in Indonesia, representing 83% of national natural rubber production (3.6 M tonnes). Smallholders cultivate less than 2 ha of land with an average yield of slightly below 1 ton/ha, as compared to state and private commercial plantations achieving 1.4 ton/ha and 1.5 ton/ha respectively. 

Diseases are a major threat to rubber trees, with 80 – 90% of farmers experiencing tree diseases in 2019 in West Kalimantan and South Sumatra, and 60% in Jambi. When disease (pink and white root rot) attacks trees, the trees should be cut down, leaving not even the stem in the ground, to minimise infection of other trees. A new rubber leaf fall disease is spreading in Sumatra and Kalimantan. This disease causes leaf fall more than twice a year and reduces annual yield by up to 40%. The treatment for this disease is expensive and is often not implemented by smallholders.

Five provinces contribute 66.5% of national production: South Sumatra, North Sumatra, Jambi, Riau, and West Kalimantan. South Sumatra province is Indonesia’s largest and most productive area. Its natural rubber area is almost 23% of the total national productive area and smallholders’ plantations take up 98.5% of this area. The productivity of smallholders in South Sumatra is the highest among smallholder areas in Indonesia, producing 1.3 ton/ha, and more likely to have received GAP training. In 2019 the government announced a replanting plan for 2019 – 2027, with a focus on South Sumatra (92,600 ha), South Kalimantan (76,550 ha) and Jambi (69,900 ha). However, this plan has no large-scale lending programme associated with it and is to be executed by local governments and has not yet been implemented. Demand for replanting is strongest in Jambi, where 40% of farmers are willing to undertake replanting. Demand is lowest in West Kalimantan, where only 1 farmer out of 79 was contemplating. Most likely the demand in Jambi is due to peak planting being undertaken in 1995 – 2005 and the majority of the trees are approaching their maximum productive age, and Jambi farmers are more aware of the importance of good quality clones and their impact on yield – they also have the highest rate of nursery clone purchase – and have suffered less from disease. 

The GPSNR Policy Framework provides a framework for GPSNR member companies to align their natural rubber purchasing policies on all aspects of sustainability: economic, environmental, and social. Modelled around the Platform’s 12 Principles of Sustainable Natural Rubber, the GPSNR policy framework sets out eight overarching themes that include commitments to legal compliance, community livelihoods, healthy, functioning ecosystems (including no deforestation), and respecting all human rights.

In line with the GPSNR Policy Framework, the GPSNR Secretariat has prepared guidance on the Policy Evaluation Procedure to support members in aligning their corporate policies with the GPSNR Policy Framework.

GPSNR Smallholders Policy Equivalent for Smallholder Members

As of March 2022, GPSNR currently has 112 smallholder members across 10 countries: Brazil, Cambodia, Ghana, India, Indonesia, Ivory Coast, Myanmar, Sri Lanka, Thailand, and Vietnam.

While this represents a small percentage of the millions of smallholder producers globally, GPSNR is committed to developing the mechanisms, tools, and processes to support smallholders globally in adopting best practices for natural rubber production in terms of economic, environmental and social outcomes. 

Source:
Financial Assessment of Smallholder Natural Rubber Production in Indonesia. July 2020. USAID Green Invest Asia, HeveaConnect, SNV and Financial Access.
2


2https://www.facsglobal.com/wp-content/uploads/2020/12/Final-Rubber-report-2020.pdf

3. Expected Deliverables

GPSNR has outlined four project stages as part of the Comprehensive Disease Fighting Approach.

Note: All available and collated information through this project will compiled, analysed and integrated with existing literature, to further contribute to developing a
full inventory of natural rubber disease in Indonesia and globally.

Stage 1: On-site inspection for diseases on a regional basis

Expected length of time:
3-4 months

Objective:
To carry out on-location inspections for presence of diseases in key rubber producing regions in Indonesia

The consultant should put forth recommendations

Key evaluation metrics:

  • Inspections should be carried out by accredited technical experts on rubber diseases in Indonesia

  • The proposal should clearly state intended regions for inspections and justify these selections. A minimum of four major natural rubber producing regions should be presented.
  • Inspections should define and document the following (non-exhaustive) list of key parameters and findings:
    • Regions and locations (GPS-data; statistically randomised sample of locations)
    • Affected area sizes and hectares inspected, as well as a map of healthy locations
    • Map of rubber growing regions; randomly sampled process of disease mapping and areas inspected
    • Number of smallholders affected
    • Photos (high quality) and other visual evidence of diseases
    • In general, all diseases reported by the interviewed farmers should be properly documented (location, phenomena, season of occurrence, photos …). Specific attention should be given to the occurrence/symptoms of the following diseases (Type of diseases, e.g.,):
      • White root disease (e.g., rigidoporus microporus fungus)
      • Leaf disease (Pestalotiopsis)
      • Fusarium
      • Tapping panel dryness (TPD)
      • Colletotrichum
      • Animal / insect / pest issues
      • All other forms of diseases / issues to be documented
      • Screen for emergent threats or new disease developments
    • History of site (e.g., past crop activities)
    • Clone types inspected
    • Interactions, if any, between natural rubber and other crops such as palm oil
    • Other details to be included by the bidder

Expected outputs

Documentation and public sharing

The overall findings of Stage 1 are expected to be documented in a formal report or detailed presentation. This will be shared with GPSNR and made publicly available, and also shared actively within the natural rubber eco-system in Indonesia (and other countries).

  • The inspection team could also be invited to share the results through a GPSNR members-only or public webinar

  • The formal report or detailed presentation is expected to serve as a living document that will be continuously open for updates and further inputs beyond the timeline of this project

Further Stages of this project

The overall findings of Stage 1 will also shape the subsequent Stages of this project, with more details outlined below.

Stage 2: Pilot Rapid Response Mechanism for Disease Fighting

Expected length of time:
To begin development concurrently with Stage 1 (Inspection), and to be in operation within 3-4 months of project starting, until project end (November 2023)

Objective:
To conceptualise and implement a pilot mechanism for smallholders to reach out to disease experts for technical advice on diseases, and to allow rapid response by experts if a situation warrants

Key evaluation metrics:

  • To establish pilot channels (such as call or digital “hotlines”) for smallholders to reach out to disease experts. This could be in any of the following (non-exhaustive) forms:
    • Telephone line
    • Whatsapp group
    • Facebook group
    • Any other possibilities

  • Outline operational and maintenance needs for the communication channel such as the following (non-exhaustive):
    • Manpower costs
    • Digital or infrastructural costs
    • Others
  • Mechanism of immediate follow-up on areas found to be vulnerable to diseases
  • Propose a long-term and sustainable model of the “hotline” mechanism, including overview of the stated costs above
    • Actual operationalising for the longer-term will depend on the effectiveness of the mechanism during the project pilot period

Expected outputs

“Hotline” Mechanism

The “hotline” mechanism, in a form proposed by the bidder, should be in operation within 3-4 months of the project starting, and be evaluated under the following criteria:

  • Uptake and usage by smallholders (to be documented on a regional basis)
  • Operational and maintenance costs
  • Effectiveness in addressing or responding to smallholder queries
  • Effectiveness in identifying vulnerable regions

Stage 3: Develop and Distribute Materials on Disease Fighting

Expected length of time:
To begin development concurrently with Stage 1 (Inspection), and to be ready for distribution to smallholder communities within 3-4 months of project start

Objective:
To develop and distribute disease fighting materials to smallholder communities, including information relating to the Rapid Response “hotline” mechanism to be developed in Stage 2

Key evaluation metrics:

  • Outline proposed content for the materials

  • Outline proposed format of the materials (e.g., video, leaflets, brochures, poster infographics etc.)
  • Outline intended manner of distribution to smallholders and their communities, including specific locations and local partners who could help with distribution (if any)
  • Note: as technical experts on diseases and experts on smallholder interactions in Indonesia, the selected bidder is expected to be in-charge of the content and distribution of the materials
    • GPSNR may separately tender for a graphic designer to work with the bidder to format content into visually effective materials

Expected outputs

  • Materials to be shared in physical or communal venues where smallholders convene on a regular basis

Stage 4: Disease Fighting Coaching

Expected length of time:
To begin after Stage 1 (Inspection) is completed, and to be planned based on the findings of Stage 1 (Inspection) and tailored toward ongoing inputs received through Stage 2 (Rapid Response “hotline”)

Objective:
To conduct on-site training for smallholders on disease treatment and prevention

Key evaluation metrics:

  • Outline coaching plans for the following scenarios, based on the results of Stage 1 (Inspection) and Stage 2 (Rapid Response “hotline”)
    • Scenario A: coaching plan for high evidence of disease outbreak in one or more regions
    • Scenario B: coaching plan for low-to-no evidence of disease outbreak in one or more regions
  • Outline intended number of train-the-trainer sessions depending on Scenarios A and B
  • Outline plan for demonstration plots based on location-specific diseases, or case-studies
  • Outline plan to provide, safeguard, and instruct smallholders on using approved materials, tools (e.g., approved agrichemicals; reference sources to procure such materials) for prevention and treatment purposes
  • Outline number of smallholders to be coached within the given timeframe

Expected outputs

  • Smallholder coaching sessions to be conducted based on the findings of Stage 1 (Inspection) and feedback received in Stage 2 (Rapid Response “hotline”)

Overall Metrics

Submitted proposals should provide justifications and details on the costs, timeline, and rationales for each of the Stages above, with a focus on the following rubber-producing regions:

  1. Northern Sumatra
  2. Southern Sumatra
  3. Central Sumatra
  4. West Kalimantan
  5. East Kalimantan

The GPSNR Capacity Building Working Group (Indonesia National Subgroup) may prioritise funding for specific regions based on relative productivity, coverage of existing coaching services, socio-economic needs, or other considerations.

Service providers are also expected to operate in line with principles and values set forth in the GPSNR Policy Framework3 such as commitment to environmental protection and sustainability, zero deforestation, community engagement and FPIC etc.

The selected service providermay also be expected to work closely with the GPSNR Capacity Building Working Group (Indonesia National Subgroup) to fine-tuned or further augment the clone selection and delivery timelines.


3https://gpsnr.dev.zippisite.com/policy-framework/

4. Proposal Format and Contents

The proposal should include the following:

  1. A workplan that outlines all key activities of the deliverables (as outlined in 3. Expected Deliverables above)
  2. Timeline and key stages of operations (based on 5. Expected Timeline below)
  3. Budget, including detailed breakdown of expected manpower, logistics, and costs (based on 6. Budget below)
  4. Description of past work and proof of technical expertise on natural rubber disease is highly critical for this RFP
    • Description of disease identification and methodologies
  5. A list of project team members with their roles in the project and associated qualifications

5. Expected Timelines

The work shall begin by July 2022 and the various phases shall be completed in accordance with the approximate timeline below:
RFP publication25 May 2022
Submission deadline for proposals8 July 2022
Contract AwardJuly 2022
First Full ReviewNovember 2022
Second Full ReviewFebruary 2023
Third Full ReviewMay 2023
Fourth ReviewAugust 2023
Final Review and Project ConclusionNovember
2023

Consultants should detail a project timeline with milestones that are approximately in line with the above timeline.

Consultants will also provide fortnightly or monthly progress updates to the GPSNR Capacity Working Group, or on an as-needed basis.

6. Budget

The Platform is anticipating that the total budget of no more than 220,000 EUR be allocated to the Four Stages of the project. The approximate expected breakdown for each Stage is as such:

  • Stage 1 and 2: 120,000 EUR
  • Stage 3: 50,000 EUR (sum inclusive of graphic designing of visuals for smallholder communities)
  • Stage 4: 50,000 EUR

Bidders should propose budget allocations for each Stage as they deem suitable.

Payment terms shall be proposed by the bidder and discussed with GPSNR, in line with each Stage of the project.

7. Evaluation Factors

GPSNR will rate proposals based on the following factors:

  1. Responsiveness to the requirements set forth in this Request for Proposal

  2. Relevant past performance/experience/accreditation of the bidder

  3. Samples of work (e.g., previous training or coaching programmes in Indonesia)

  4. Technical expertise/experience of bidder and bidder’s staff

  5. Proposed timeline of operations

GPSNR reserves the right to award to the bidder that presents the best value to GPSNR as determined solely by GPSNR in its absolute discretion.

More To Explore

Tender

(CLOSED) Request for Proposal – GPSNR Compliance Panel Guidance (GPSNR-RFP-A02-014)

INTRODUCTION AND BACKGROUND

The Global Platform for Sustainable Natural Rubber is an international, multi-stakeholder, voluntary membership initiative committed to improving the socioeconomics and environmental performance of the natural rubber value chain.  Development of the GPSNR was initiated by the CEOs of the World Business Council for Sustainable Development (WBCSD) Tire Industry Project (TIP) in 2018.  Members of the platform include tire manufacturers, rubber suppliers and processors, vehicle makers and NGOs.  Representatives from each of these stakeholder groups have contributed to the development of the Singapore-based platform and the wide-reaching set of priorities that will define strategy and objectives.

The GPSNR Statutes mandate the creation of an independent Compliance Panel to review and ensure that Members meet GPSNR membership requirements in conformance with Statutes, Code of Conduct, decisions, standards and processes, and make recommendations to GPSNR Executive Committee. The Compliance Panel will administer decisions in line with relevant GPSNR procedures. The panel shall be composed of three external experts and will operate independently from the membership and Secretariat.

GPSNR is seeking a consultant to help define procedures and guidelines required for the transparent and impartial operations and activities of GPSNR Compliance Panel.

PHASE I: OBJECTIVES AND SCOPE OF WORK

Objectives: To review GPSNR Statutes and relevant procedures, and develop recommendations and propose options available for the structure, operations and verification protocols of the Compliance Panel. 

The current GPSNR membership statutes document stipulates the following: 

10. Compliance System and Compliance Panel. The Executive Committee shall establish a Compliance System to ensure that Members meet Platform membership requirements in conformance with the Platform’s Statutes, Code of Conduct, decisions, standards and processes. The operating procedures of the Compliance System shall be defined in terms of reference to be adopted by the Executive Committee, consistent with the following core provisions: 

a. The Compliance System shall be administered by the Secretariat. 

b. Recommendations and decisions under the Compliance System shall be made by a Compliance Panel. 

c. The Compliance Panel’s functions shall include the review of whether a Member (in the period after its admission) meets the requirements for membership. 

d. The Compliance Panel shall operate independently from the Executive Committee and General Assembly. 

e. The Compliance Panel shall be composed of an independent body of three external experts that meet on a regular basis. 

f. Experts shall be nominated by an Ordinary Member and elected by a decision of the General Assembly to serve a 3-year term. 

g. A Member of the Compliance Panel may be removed by a consensus decision of the Executive Committee with a clear justification available to members upon request. 

h. Members of the Compliance Panel shall be subject to a conflict of interest policy, as adopted by the Executive Committee. 

i. The Compliance System shall ensure that Members are afforded an opportunity to be heard and an opportunity to cure any findings of non-compliance, alleged by either the Compliance System or Grievance Mechanism. 

The consultant is expected to provide an outline of relevant existing compliance models, a comparison of options that GPSNR could consider, and justified recommendations based on: 

  • Review of other existing membership and/or compliance panel models  
  • Review of GPSNR Statutes and other relevant GPSNR documents  
  • Interviews with GPSNR members and relevant external stakeholders 
  • Other relevant expert advice and guidance 

Scope of Work:

GPSNR is seeking a consultant to recommend operational procedures and guidance for the GPSNR Compliance Panel, to include: 

  • Proposed roles and responsibilities of GPSNR Compliance Panel 
  • Suggested scope of the CP’s activities 
  • Recommended qualification requirements and selection protocols for Compliance Panel members; covering necessary relevant expertise, how to avoid conflict of interests, and procedures for the appointment and removal of Panel members  
  • Options for the structure of decision-making within the panel 
  • Proposed verification procedures by the panel to assess ongoing compliance of GPSNR members with membership requirements 
  • Procedure for issuing appropriate recommendations to ensure compliance of GPSNR members, based on the submitted results of the verification process.  
  • Options for GPSNR to deal with situations where members cannot demonstrate compliance with relevant membership requirements, including steps towards potential suspension or termination in cases of major or persistent noncompliance 
  • Suggestions for appeal procedures related to the decisions/recommendations of the GPSNR CP 
  • Procedure for recording and reporting of Compliance Panel decisions/recommendations  

PROPOSAL FORMAT AND CONTENTS

  • Description of past work that is relevant to this RFP. 
  • A workplan that outlines all key activities of the pilot study, cost for each and timeline for completion. 
  • A description of deliverables and indication of accessibility to GPSNR members and/or the public.  
  • A list of project team members with their roles in the project and associated qualifications. 

TERMS

The work shall begin by 21 May 2021 and the various phases shall be completed in accordance with the dates outlined in the timeline below: 

Activity  Due Date 
Submission deadline for proposals  7 May 2021 
Contract Award  14 May 2021 
Work begins  By 21 May 2021 
Presentation of first draft to GPSNR Policy Toolbox WG (WG1)  2 June 2021 (adjustable) 
Review of draft based on WG1 feedback  3-10 June 2021 
Submission of final recommendations   11 June 2021 

BUDGET

The Platform is anticipating that the total budget of no more than 10,000 SGD be allocated to the engagement. 

Payment terms shall be: 

  • 20% at the signing of the contract 
  • 30% at the presentation of the first draft 
  • 50% upon delivery of the final recommendations. 

EVALUATION FACTORS

GPSNR will rate proposals based on the following factors, with cost being the most important factor: 

  1. Responsiveness to the requirements set forth in this Request for Proposal; 
  2. Relevant past performance/experience; 
  3. Samples of work; 
  4. Cost, including an assessment of total cost of ownership; 
  5. Technical expertise/experience of bidder and bidder’s staff. 

GPSNR reserves the right to award to the bidder that presents the best value to GPSNR as determined solely by GPSNR in its absolute discretion. 

Proposals should be submitted to stefano.savi@gpsnr.org and aidan@gpsnr.org for consideration.

Request For Proposal – GPSNR-RFP-C03-034-Polygon Mapping Malaysia

Introduction & Background

The Global Platform for Sustainable Natural Rubber (GPSNR) is an international, multi-stakeholder, voluntary membership initiative seeking to lead improvements in the socioeconomic and environmental performance of the natural rubber value chain. Members of the platform include tire manufacturers, rubber suppliers and processors, vehicle makers and NGOs. 

 

The Manufacturer’s Subgroup (SG) consists of GPSNR members who are rubber product manufacturers only.  The SG is seeking a consultant/field to map their supply shed (i.e., all the farms that they are sourcing from) focusing on polygon mapping techniques in complex supply chains such as in Indonesia, Malaysia and Thailand – each with a separate RFP, and report on the price and time required for each polygon mapped.

Objectives

The goal of the project is to investigate what effort (i.e., time and cost) may be required for a rubber processor to map their supply chain in complex supply chains in Malaysia. 

The consultant is to map small holder farmers in selected regions within Malaysia. Manufacturers will specify the regions to be mapped at a later date. 

The service provider should work with the Manufacturer’s Subgroup and the participating processors from Malaysia and their dealers to:

 

  1. Keep track of the time and costs of all mapping related activities throughout the study, calculate time and cost of mapping each polygon, and provide them to their GPSNR Point of Contact at the end of the survey.

  2. Register farmers using a provided data logger application. The service provider is welcomed to use their own data logger application. 

 

Scope of Work/Expected Deliverables

Specifically, GPSNR expects the consultant to:

  1. Map regions of rubber producers supplying to the participating processor in Malaysia via polygon mapping. 

    1. Single GPS coordinates should not be utilised irrespective of the size of the plantation. 

    2. Geo mapping to include coordinates up to 6 decimal places in geoJSON format 

    1. Store/transfer geo location polygons mapped, to a 3rd party database as designated. 

    2. Bi-weekly progress reports 

    3. Ensure compliance to applicable local and global data privacy norms and regulations such as but not limited to GDPR, PDPA, etc.

  1. We would like a detailed account of the resources: 

    1. Price per polygon mapped – Cost per unit (per Farmer/Plot/Polygon) 

    2. Timeline to map Polygons per day (eg 18 months to map X polygons)

  1. A recommendation of the scalability of this pilot

    1. Can the same estimated cost/time/labour be replicated in other regions/jurisdictions within the same country?

    2. E.g., $X/farm is calculated but is not scalable due to what reason(s).

  2. Interested parties should submit the quote for the following – 

    1. For mapping polygons (cost per Ha)

    2. For mapping polygons + completing set of questionnaires as a part of risk assessment

  3. Comply with applicable data privacy norms and regulations (including but not limited to GDPR and PDPA).

  4. An optional activity that service providers could provide is the ability to integrate a transactional traceability function (own or 3rd party as designated)

Proposal Format and Contents

The proposal should include the following:

 

  1. A workplan that outlines the key activities towards the deliverables outlined in Expected Deliverables above

  2. The timeline and key stages of operations based on Project Timeline below 

  3. Budget, including detailed breakdown of expected manpower, logistics, and costs as mentioned above

  4. Description of past work and technical expertise that is relevant to this RFP

A list of project team members with their roles in the project and associated qualifications.

Submission Guidelines & Requirements 

The following submission guidelines & requirements apply to this Request for Proposal: 

 

  1. Proposals will only be accepted from individuals or firms with experience relevant to this project. 

  2. Examples of previous relevant work should be provided. 

  3. A technical proposal must be provided that is not more than 4 pages. This technical proposal must provide an overview of the proposed solution as well as resumes of all key personnel performing the work. In addition, the technical proposal should provide a proposed schedule and milestones, as applicable. 

  4. A price proposal must be provided that is not more than 1 pages. This price proposal should indicate the overall fixed price for the project as well as hourly rates and an estimated total number of days. 

  5. Proposals must be signed by a representative that is authorized to commit bidder’s company. 

  6. Proposals must be received prior to the 25th of September to be considered. Proposals should be submitted to stefano.savi@gpsnr.org and aidan@gpsnr.org for consideration. 

  7. GPSNR reserves the right to amend the scope and budget of this RFP in order to get the most suitable consultant for each topic. 

Project Timelines

 

RFP Published

4 Sep 2023

Proposal Submission Deadline

25 Sep 2023

Contract Awarded

9 Oct 2023

Initial methodology presentation and Q&A with subgroup

23 Oct 2023

Bi-weekly progress updates

23 Oct till project conclusion

Other milestones to be agreed upon during initial Q&A

 

 

Budget

The Platform is anticipating that a total budget of no more than 20USD/ha be allocated to this engagement and more competitive quotations will be favoured. 

 

Payment terms shall be:

  • 20% at the signing of the contract

  • 30% at the midpoint date to be agreed upon and memorialized in the contract based on the submitted work plan

  • 50% to be agreed based on mutually agreed milestones

The allocation of the payment shall be based on the net amount after travel expenses, if deemed necessary by both the consultant and Secretariat, are incurred and documented.

Evaluation Factors

GPSNR will rate proposals based on the following factors, with cost being the most important factor:

  1. Responsiveness to the requirements set forth in this Request for Proposal

  2. Relevant past performance/ experience

  3. Samples of work

  4. Cost, including an assessment of total cost of ownership

  5. Technical expertise/experience of bidder and bidder’s staff

 

GPSNR reserves the right to award to the bidder that presents the best value to GPSNR as determined solely by GPSNR in its absolute discretion.


View RFP Document here

Scroll to Top